-40%
LNW Engineering | Knudsen | Neffco | Bowl Gold Centrifugal Concentrator
$ 2217.6
- Description
- Size Guide
Description
LNW ENGINEERINGLNW Engineering | Knudsen | Neffco | Bowl Gold Centrifugal Concentrator
AC-32SB
BOWL
100% Machined
Made in U.S.A.
Fast Shipping
For the Recovery and Concentration of Gold
Applications
Recovery of Gold from Alluvial or hard rock deposits
Upgrading and recovery of gold from concentrates from other gravity separation stages eg jigs, spirals and cone concentrators
Used for exploration and evaluation of gold deposits as well as small production
Other mineral applications include niobium, tantalum, coltan, tin, tungsten, and scheelite
Features
Batch operation with simple cleaning to remove concentrate
Relatively low rotational speed to minimize maintenance requirements
No added water for bed dilation
Simple construction
Low capital cost
Compact and lightweight
Bowl geometry designed for maximum gold retention
MADE IN THE USA
Design Data
Capacity
The maximum capacity is 8tph on 1/8″ (4mm) screened material at a pulp density of 30% solids.
NOTE: Unit capacity is dependent on the application. The feed rate to the unit may have to be lowered as the quantity of
heavy minerals in the feed increases.
Feed Size
The nominal feed size is -1/8″(4mm)
NOTE: This feed size may be increased to 1/4″ (8mm) maximum size depending on the shape of the particles
Mechanical Data
Rotation speed: 115 RPM
Required motor size: ½ HP
Weight: 245 lbs / 112kg
Shipping weight: 360 lbs /164kg (approx)
Concentrate Removal Procedure
Stop bowl rotation
Removal feed pipe support
Place a bucket under the bottom outlet and remove the plug
Hose out between riffles with a fine spray
Replace plug and feed pipe and recommence operation
Flow-sheet Concepts
Exploration
The use of the AC-32 Bowl simplifies small exploration plants. A plant only requires screening and an AC-32 Bowl for gold recovery.
Concentration
The AC-32 Bowls can be used in parallel to suit the feed tonnage. To maximize recovery, units can also be used in series with tailings from the first unit fed to a second unit.
When ordering, please email or call us directly to provide an Invoice for the calculated freight cost to your location.
Payment
We accept payment by any of the following methods:
Check, Wire Transfer, Credit Card,
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
BUY NOW!
Returns
Shipping
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
d
We offer FREE pickup or contact us for Freight Quote to your destination!
Your order will be dispatched within 10 working days of receiving payment (Monday-Thursday) and you should expect to receive it within 7 to 10 days after dispatch (for orders shipped UPS Freight).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Extreme Quality
Veteran Owned
Fast Shipping
For the Recovery and Concentration of Gold Applications --- Recovery of Gold from Alluvial or hard rock deposits --- Upgrading and recovery of gold from concentrates from other gravity separation stages eg jigs, spirals and cone concentrators --- Used for exploration and evaluation of gold deposits as well as small production --- Other mineral applications include niobium, tantalum, coltan, tin, tungsten, and scheelite Features ---Batch operation with simple cleaning to remove concentrate ---Relatively low rotational speed to minimize maintenance requirements ---No added water for bed dilation ---Simple construction ---Low capital cost ---Compact and lightweight ---Bowl geometry designed for maximum gold retention ---MADE IN THE USA Design Data Capacity The maximum capacity is 12tph on 1/8″ (4mm) screened material at a pulp density of 30% solids. NOTE: Unit capacity is dependent on the application. The feed rate to the unit may have to be lowered as the quantity of heavy minerals in the feed increases. Feed Size The nominal feed size is -1/8″(4mm) NOTE: This feed size may be increased to 1/4″ (8mm) maximum size depending on the shape of the particles Mechanical Data ---Rotation speed: 115 RPM ---Required motor size: ½ HP ---Weight: 245 lbs / 112kg ---Shipping weight: 360 lbs /164kg (approx) Concentrate Removal Procedure ---Stop bowl rotation ---Removal feed pipe support ---Place a bucket under the bottom outlet and remove the plug ---Hose out between riffles with a fine spray ---Replace plug and feed pipe and recommence operation Flow-sheet Concepts Exploration The use of the AC-32 Bowl simplifies small exploration plants. A plant only requires screening and an AC-32 Bowl for gold recovery. Concentration The AC-32 Bowls can be used in parallel to suit the feed tonnage. To maximize recovery, units can also be used in series with tailings from the first unit fed to a second unit. When ordering, please email or call us directly to provide an Invoice for the calculated freight cost to your location.
LNW Engineering | Knudsen | Neffco | Bowl Gold Centrifugal Concentrator
LNW ENGINEERING
AC-32SB
BOWL
For the Recovery and Concentration of Gold
Applications
Recovery of Gold from Alluvial or hard rock deposits
Upgrading and recovery of gold from concentrates from other gravity separation stages eg jigs, spirals and cone concentrators
Used for exploration and evaluation of gold deposits as well as small production
Other mineral applications include niobium, tantalum, coltan, tin, tungsten, and scheelite
Features
Batch operation with simple cleaning to remove concentrate
Relatively low rotational speed to minimize maintenance requirements
No added water for bed dilation
Simple construction
Low capital cost
Compact and lightweight
Bowl geometry designed for maximum gold retention
MADE IN THE USA
Design Data
Capacity
The maximum capacity is 12tph on 1/8″ (4mm) screened material at a pulp density of 30% solids.
NOTE: Unit capacity is dependent on the application. The feed rate to the unit may have to be lowered as the quantity of
heavy minerals in the feed increases.
Feed Size
The nominal feed size is -1/8″(4mm)
NOTE: This feed size may be increased to 1/4″ (8mm) maximum size depending on the shape of the particles
Mechanical Data
Rotation speed: 115 RPM
Required motor size: ½ HP
Weight: 245 lbs / 112kg
Shipping weight: 360 lbs /164kg (approx)
Concentrate Removal Procedure
Stop bowl rotation
Removal feed pipe support
Place a bucket under the bottom outlet and remove the plug
Hose out between riffles with a fine spray
Replace plug and feed pipe and recommence operation
Flow-sheet Concepts
Exploration
The use of the AC-32 Bowl simplifies small exploration plants. A plant only requires screening and an AC-32 Bowl for gold recovery.
Concentration
The AC-32 Bowls can be used in parallel to suit the feed tonnage. To maximize recovery, units can also be used in series with tailings from the first unit fed to a second unit.
When ordering, please email or call us directly to provide an Invoice for the calculated freight cost to your location.
BUY NOW!
Payment
We accept payment by any of the following methods:
Check, Wire Transfer, Credit Card,
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
d
We offer FREE pickup or contact us for Freight Quote to your destination!
Your order will be dispatched within 10 working days of receiving payment (Monday-Thursday) and you should expect to receive it within 7 to 10 days after dispatch (for orders shipped UPS Freight).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Fast Shipping
Veteran Owned
Extreme Quality
For the Recovery and Concentration of Gold
Applications
Recovery of Gold from Alluvial or hard rock deposits
Upgrading and recovery of gold from concentrates from other gravity separation stages eg jigs, spirals and cone concentrators
Used for exploration and evaluation of gold deposits as well as small production
Other mineral applications include niobium, tantalum, coltan, tin, tungsten, and scheelite
Features
Batch operation with simple cleaning to remove concentrate
Relatively low rotational speed to minimize maintenance requirements
No added water for bed dilation
Simple construction
Low capital cost
Compact and lightweight
Bowl geometry designed for maximum gold retention
MADE IN THE USA
Design Data
Capacity
The maximum capacity is 12tph on 1/8″ (4mm) screened material at a pulp density of 30% solids.
NOTE: Unit capacity is dependent on the application. The feed rate to the unit may have to be lowered as the quantity of
heavy minerals in the feed increases.
Feed Size
The nominal feed size is -1/8″(4mm)
NOTE: This feed size may be increased to 1/4″ (8mm) maximum size depending on the shape of the particles
Mechanical Data
Rotation speed: 115 RPM
Required motor size: ½ HP
Weight: 245 lbs / 112kg
Shipping weight: 360 lbs /164kg (approx)
Concentrate Removal Procedure
Stop bowl rotation
Removal feed pipe support
Place a bucket under the bottom outlet and remove the plug
Hose out between riffles with a fine spray
Replace plug and feed pipe and recommence operation
Flow-sheet Concepts
Exploration
The use of the AC-32 Bowl simplifies small exploration plants. A plant only requires screening and an AC-32 Bowl for gold recovery.
Concentration
The AC-32 Bowls can be used in parallel to suit the feed tonnage. To maximize recovery, units can also be used in series with tailings from the first unit fed to a second unit.
When ordering, please email or call us directly to provide an Invoice for the calculated freight cost to your location.